A washing machine leaking from the bottom is nothing short of a nightmare for people. Imagine watching the water drain out and soak through your belongings which it wasn’t supposed to do.
That’s the biggest problem with the Whirlpool Cabrio washer.
There are some troubleshooting steps that you can take to ensure the leakage is stopped. I have dealt with many leaks so I can tell you all the possible reasons for the same.
Here is a list of tools that you will need if you want to correct the water leakage by yourself.
- Screwdriver
- Flathead screwdriver
- Screws
- Drill
- Hammer
Fix Whirlpool Cabrio Washer Leaking From The Bottom.
Whirlpool Cabrio washers can leak from the bottom due to several reasons. One of the top reasons for the leakage is a loose hose clamp.
However, there may be more pressing problems that may cause water leakage. Preventing and correcting these leakages are essential since they may have catastrophic effects.
Carefully review each of these solutions to determine if they apply to your case. Keep the tools handy to make the process faster.
1. Check the Hose Clamp
Every Cabrio washer has a clamp connecting the drain hose to an exterior drainage pipe. This pipe is used to drain away excess and utilized water during a drain cycle.
When the hose clamp is loose, rusted, broken, or missing, the connection will be fragile and may cause water leakage. Look for the clamp in the interior or exterior of the washing machine near the drain pipe.
If the clamp appears worn out, you may need to replace it. A loose hose clamp can be tightened with a pair of pliers.
2. Problems with the Tub Seal
Sometimes you may notice water leakage during the rinse cycle. A faulty tub seal usually causes this problem in Whirlpool Cabrio washers.
Tub seals can become broken or damaged depending on the amount of wear and tear it has been subjected to. This breaking down of the tub seal will lead to a water leakage issue.
Changing a tub seal is tricky, and you might need professional assistance. The washer must be dismantled entirely, which is a rather complicated process.
3. Filter needs cleaning
The filter on a Whirlpool washing machine goes through tons of dirt and debris in its lifetime. If you don’t clean the filter for extended periods, it will start to clog and cause water leakage.
I have been making the mistake of overlooking this problem and avoiding cleaning the filter. Of course, it caused leakage, and I did have to struggle to clear the mess.
You can manually clean your Cabrio washer filter to avoid this problem. You will find it either at the top edge of the washing machine’s drum or the neat drain hose.
4. Broken or worn-out coupler
A broken coupler can be the reason why there is water leakage in your Whirlpool Cabrio washer. A coupler is a rubber or plastic seal between the motor and a washer’s drum.
Couplers, like any other washer parts, can break down and get damaged due to normal wear and tear. The good thing is that it is cheap and easy to source.
However, you might need a professional to become more familiar with the working of a washing machine. If you want to DIY, you have to disassemble the washer and reach the water pump where the coupler is located.
Can You Replace A Whirlpool Cabrio Washer Drain Pipe At Home?
Yes, it is possible to change the washer drain pipe at home. It is a relatively simple process, and you will find plenty of tutorials online.
All you need to do is loosen the clamp on your drain hose and remove it entirely. Next, detach the drain hose by wiggling it out of the machine.
Some water may come out on end, so wipe that out immediately. You can put the hose clamp on the new drain pipe and attach it back to the machine.
How Often Should You Clean A Whirlpool Washer Filter?
A Whirlpool washer filter must be cleaned at least once every six months. If you use the washer frequently, you must clean the filter at least once every four months.
Washer filters can easily get clogged due to the dirt they handle daily. If you clean them infrequently, there will be water leakage problems, and clothes will remain dirty even after a good wash.
Cleaning the washer filter is straightforward and won’t require much time. It would be best if you remembered to clean the filter to avoid future complications.
How Long Does A Whirlpool Cabrio Washer Last?
A Whirlpool Cabrio washer can last anywhere between 10 years to 14 years. However, if you don’t maintain it properly, it can become unusable after eight years.
The secret to having a long-living washer is good maintenance. If you keep overloading the washer and using it without repairs, it will be dead before its time.
However, if you replace parts when they have worn out and clean everything from time to time, the washer may last longer.
Final Remarks
Here are a few different ways to fix a Whirlpool Cabrio washer that is leaking from the bottom.
- Replace the hose clamp.
- Clean out the filter.
- Replace the tub seal.
- Examine the coupler.
My name is Rick Kinney and I am the founder of ExHandyman. I have worked as a handyman for many years, and fixing stuff is my greatest pleasure in life.